Arptel SS7 Dialer

Arptel SS7 dialer makes TCS the world’s fastest true LCR validator. It can make Voice calls, Modem calls (Speeds up to V.90), Group 3 fax calls (Speeds up to V.34, 33.6kbps) and pure 64k unrestricted calls to verify all type of traffic.

The Dialer supports ETSI (ITU-T) SS7 MTP3/ISUP protocols.

Up to 30 concurrent calls (standard model) that provides fast LCR validation. Special models with more than 240 concurrent calls can be offered on request.

Users can record the audio of a call and play the result on your normal PC speaker. This is powerful when you get inaccurate cause codes from the network and you have to listen to the call for understanding the problem.

The Dialer can be shipped with the powerful NIQA voice analysis module. It provides ITU MOS quality scale judgments (1 - 5) of normal voice call without any special reference in the far end. It will recognize network conditions and impairments due to: Low-Bit Rate Speech Codecs, Mutes, VoIP, Transcoding, Noise, Mobile Network Errors and Clipping.

Technical Specifications

INTERFACE

• E1 RJ-45 trunks>
• Ethernet 10BASE-T/100BASE-TX/1000BASE-T

STANDARDS

• Support for ETSI (ITU-T) SS7 MTP3/ISUP protocols
• Call Types: Speech, 3.1KHz Audio, 7KHz Audio, 64K Unrestricted, video
• ITU-T Rec T.4, ITU-T Rec T.30
• ITU-T V.34 G3: up to 33,600bps
• ITU-T V.17 G3: up to 14,400bps
• ITU-T V.29 G3: up to 9,600bps
• ITU-T V.27ter G3: up to 4,800bps
• ITU-T V.34 28,800~2,400bps
• ITU-T V.90 28.800bps~56k

DIMENSIONS

• 19 inch wide, 1 unit high rack mountable
• High 44 mm (1.73") x Wide 426.5 mm (16.79”) x Deep 429 mm (16.89")
• Weight: 7,5 Kg

CONSTRUCTION/FINISH

• Type of metal: Precoated phosphate 1mm steel
• Finish: Textured paint, black

POWER SUPPLY

• Input: 115/240v VAC, autoselecting, 47 to 63 Hz

REGULATORY

• Safety: UL, CE
• Emissions Control: FCC Class B

ENVIRONMENTAL

• Operating Temperature: 10°C - 45°C ambient
• Humidity: 20%-80% non-condensing

Ordering information

IQ Dialer SS7/E1-8A

• Item: 1208
• The dialler requires an E1 trunk with one ITU-T SS7 ISUP signaling link and a LAN connection. Equipped with 8 DSP units.
• Can perform 30 concurrent test calls with emulation of fax and modem on 8 of the channels.

IQ Dialer SS7/E1-30A

• Item: 1230
• The dialler requires an E1 trunk with one ITU-T SS7 ISUP signaling link and a LAN connection. Equipped with 30 DSP units.
• Can perform 30 concurrent test calls with fax and modem emulation on all channels.

IQ Dialer Extreme

• Item: 1299
• The dialer is built from a custom specification. This dialer can be designed to perform large amount of concurrent calls at load tests or comparable with either ISDN or SS7.

+43 1930 3000

©2010 Arptel Ltd.
All rights reserved.